All valves manufactured in the UK
Series 2000 Solenoid Valves are Safety Shutoff or Control Valves for use on gases in gas families 1, 2 and 3 and are also suitable for use with air within the valves pressure range - see specification <<MORE  
Accessories - We also include a full range of accessories to compliment the range including, emergency cutout switches and manual resets. <<MORE
Contact: sales@gasalarm.co.uk
Phone: 0141 774 2323


APPLICATION

Series 2000 Solenoid Valves are Safety Shutoff or Control Valves for use on gases in gas families 1,2 and 3 and are also suitable for use with air within the valves pressure range (see specification)
FEATURES

* CE Certified
* Approved to EN161 Group 2, Class A
* Range from 3/4" to 2"
* Available as Fast or Slow opening
* Full-wave Rectified Coil for quiet operation
* Available with Flow Adjustment
* Normally closed operation
* Available with CPI Switch
* Models available up to 500mbar pressure
* 230V, 110V and 24V AC 50HZ Versions
* Pressure test point on Inlet and Outlet
* Range of Accessories available

DESCRIPTION

Series 2000 is a range of Solenoid Operated Safety Shut-off Valves. Their primary application is the on/off control of low pressure 1st (town gas), 2nd (natural gas) and 3rd (LPG) family gases, although they may be used for devices such as automatic burners and for low pressure air applications.
ORDERING CODES

Size
Part Numbers
Type- Fast Opening
230V AC
110V AC
24V AC
3/4"
2000 230V
2000 110V
2000 24V
1"
2001 230V
2001 110V
2001 24V
1 1/4"
2002 230V
2002 110V
2002 24V
1 1/2"
2003 230V
2003 110V
2003 24V
2"
2004 230V
2004 110V
2004 24V
Size
Part Numbers
Type- Slow Opening
230V AC
110V AC
24V AC
3/4"
2000 230VS
2000 110VS
2000 24VS
1"
2001 230 VS
2001 110 VS
2001 24 VS
1 1/4"
2002 230 VS
2002 110 VS
2002 24 VS
1 1/2"
2003 230 VS
2003 110 VS
2003 24 VS
2"
2004 230 VS
2004 110 VS
2004 24 VS

For A Full List of Ordering Codes Please contact:
sales@gasalarm.co.uk
SPECIFICATION

Media:
Non-corrosive gases and air, approved for use with gas families
1. Town Gas
2. Natural Gas
3. LPG

Media Temperature Range:
-10° to +60°C

Ambient Temperature Range:
-10° to +60°C

Opening Speed etc.:
Fast Opening Models< 1sec.
Slow Opening Models 5 secs to 20 secs ref to 80% of Vmax.
Adjustable initial lift 0 to 60% of Vmax.

Closing Speed:
All models <1 sec.

Electrical:
Models available
230V AC 50 Hz
110V AC 50Hz
24V AC 50Hz

Approvals:
All models approved to EN161 Class A,
Group 2 for Gas Families 1,2 & 3.
EC Certified
EN 126


Pipe Connections:
Rp 3/4" up to RP 2" - ISO 7 - 1

Pressure Test Points:
Plugged test point on Inlet and outlet ports on right hand side of body.

Inlet Pressure:
3/4" - 36-mbar
Higher Pressure Versions available to Special Order.


Orifice Diameter:
3/4" - 20mm
1" - 25mm
1 1/4" + 1 1/2"- 32mm
2" - 55mm


Seat Disc:
Buna "N"

Cable Gland:
2 x Pg 11


Environmental:
IP54 - IEC 529
INSTALLATION and OPERATION

Installation
Observe local Codes of Practice e.g. Use of CORGI registered installers.
Ensure Gas supply is switched off before commencing installation. Connecting pipework must be clean. Mount Valve onto pipework using a suitable thread sealant which must be applied to the pipework, not the internal thread of the valve. When installing a valve in the pipework do not use the coil
as a lever, but use the correct wrench.

Commissioning
Leak test the Gas connections, Switch on Gas supply, Test points may be used to establish static pressure of the gas supply. Control is now ready for service.


Flow Adjustment
Flow adjustable valves are factory set at a maximum flow. For flow reduction insert a 6mm Allen Key into the adjuster on the valve bottom and turn anti-clockwise.
For further information contact: sales@gasalarm.co.uk
Phone: 0141 774 2323
Accessories
 
Powerset  - Manual Reset Switch


FEATURES
A push button operated switch which isolates the electrical supply to the valve in the event of a power failure.

INSTALLATION
Remote model: suitable for screw fixing to a flat surface.

SPECIFICATION
Product Code:

Remote model - BC66RSR (add voltage suffix)
Consumption: - 1VA max
Drop out time: - typically 10ms
Protection: - integral - IP40; REMOTE - IP65

Powersev - Emergency Cutout Switch

FEATURES
A remote mounted push-to-break / twist-to-reset switch for emergency use.

INSTALLATION
Box is suitable for screw fixing to a flat surface.

SPECIFICATION
Product Code:

BC66ESB - (Metal Box)
BC66ESB/P - (Plastic Box)
BC66ESB/K - (Plastic Box, Key Operated)

Powerlink - Thermal Fuse

FEATURES
A remote mounted thermally operated non-resetting fuse in a vented metal housing suitable for wall mounting.

INSTALLATION
Housing is suitable for screw fixing onto a flat surface, or may be supported on the end of rigid conduit pipe.

SPECIFICATION
Product Code : BC66MRF
Electrical Rating : single pole changeover 5A max. 230V a.c. - (resistive and inductive)
Fusing temperature : nom. 70°C; 10°C reset differential



ALSO AVAILABLE AS NON RESETTABLE VERSION!

Contact: sales@gasalarm.co.uk
Phone: 0141 774 2323